Product Description
BOSS 6/12k Proportioner
Features
- Dual heating blocks for the ISO and Resin provides extra heating elements for colder climates
- Simple 240V single-phase system. The electrical system is all breaker and relay design, for easy repairs if needed.
- Heating elements are much larger than those in competitive machines, capable of heating more material faster than other proportioners
- Designed to spray polyurethane or polyurea – Foam, bed liners, sealants, slab jacking, etc.
- 3,000 psi maximum working pressure
- Air-driven machine with 6” motor
- Higher pressure output than 5” series
- Powerful and larger heating elements for more material to reach desired Delta-T
- Easily attainable components to minimize downtime
- Easy to power on and off
- Digital heating controls
- Hose heat transformer for up to 400 feet of hose
Technical Data
- Preheat 12,000 watts
- 195 degrees maximum fluid temperature
- 32 lb/min. maximum output
- .0500 gal/cycle output each cycle (A & B pumps)
- Fluid inlet ¾” npt with ½” npt outlet
- Component A (ISO) #6 (3/8”) JIC with #5 (5/16”) JIC adapter
- Component B (Resin) #6 (3/8”) JIC with #6 (3/8”) JIC adapter
- Fluid circulation ¼” with thermoplastic tubing (3,000 psi)
- Parts contacting fluid: stainless steel, zinc plated, carbon steel, aluminum, chrome, brass, PTFE, Viton O-rings
- Weight – 301 lbs.
- Dimensions – D: 32” x W: 36” x H: 51”
- Air requirements – 17 cfm @ 150 psi; requires at least 26-30 cfm @ 100 psi, which is easily acquired with a 18 hp gas air compressor or 10 hp electric air compressor
